This is where the evaporator (indoor unit) is mounted on the inside of the external wall.
The condenser (outdoor unit) is to be located externally on the same wall and is within 4M of the indoor unit.
The outdoor unit is then located at ground level and is ether bolted directly to a set of floor skis or wall brackets.
Installations not as described above will incur additional charges,
Configuration of any WiFi options available on your AC units are not included
.
Please note the above is an installation price guide only and not a quotation.
System and Materials & Labour Economy
Single Split Fujitsu 2.5KW High Wall Mounted Unit for Heating and Cooling. Indoor & Outdoor Unit
* 2.8kW heating / 2.5kW cooling.
* Electrical Supply 10 AMP ( Fuse spur required not included )
* 2.5kW Wall Mounted internal unit product code ASYG09KPC
* Pipework up to 4m, white 75mm by 75mm plastic trunking for the external pipework
* External bracket to support external unit ( unit install at low level)
System and Materials & Labour Standard
Single Split Fujitsu 2.5KW High Wall Mounted Unit for Heating and Cooling. Indoor & Outdoor Unit Standard Range
* 2.8kW heating / 2.5kW cooling.
* Electrical Supply 10 AMP ( Fuse spur required not included )
* 2.5kW Wall Mounted internal unit product code ASYG09MCC
* Pipework up to 4m, white 75mm by 75mm plastic trunking for the external pipework
* External bracket to support external unit ( unit install at low level)
System and Materials & Labour Designer
Single Split Fujitsu 2.5KW High Wall Mounted Unit for Heating and Cooling. Indoor & Outdoor Unit Designer
* 2.8kW heating / 2.5kW cooling.
* Electrical Supply 10 AMP ( Fuse spur required not included )
* 2.5kW Wall Mounted internal unit product code ASYG09KGTB
* Pipework up to 4m, white 75mm by 75mm plastic trunking for the external pipework
* External bracket to support external unit ( unit install at low level)